Speed Breakers RK-10

From: $132.00

Suggested for traffic of 10 mph.

From 6 ft. to roadway widths, Speed Breakers deliver a multitude of configurations and speed reducers to meet site requirements and provide ability for always having the right size on hand. Speed Breakers are modular and expandable in 2 ft. lengths to fit any location requirements.

The Speed Breaker RK-10 begins with a 6 ft design  — (2) 2ft. ends and (1) 2 ft. center module (RK-10C).  Additional center modules (RK-10C) can be purchased to expand the length by 2 ft. each. The module units are connected together with our Dual Flange Connectors (included) forming a solid one piece assembly. The modules are then bolted into the pavement forming a virtually indestructible, energy absorbing unit. Installation hardware is included with the modules.

Speed Breakers are ideal for:
Roadways / Alleys / Parking Lots and Garages / Shopping Malls / Bike or Traffic Lanes / School Drop-off Zones / Hospitals / Ped Crossings / Toll or Guard Booths / Apartments / Hotels

Online orders are only available for shipping to Arizona, Arkansas, California, Florida, Georgia, South Carolina, Louisiana, Oklahoma, Nevada, New Mexico, Tennessee and Texas. If you would like to ship a Speed Breaker outside of these states, please visit a local distributor or call us at (972) 623-9885 to order.

Base RK-10 Speed Breaker includes (2) Ends and (1) Center Module (6 ft) for $132.00.
Customize Speed Breaker by adding additional Center Modules and Cat Eyes:

2 ft. Center Module

Each (1) Center Module extends the Speed Breaker by 2 ft.
Clear selection
SKU: RK-10-6K Category: Tags: ,

Product Description


Download Instructions, Data Sheets & Configuration

Speed Breakers Technical Data Sheet
Speed Breakers Installation Instructions

SPEED BREAKERS Advantages Include:

24″ End Caps and Center Modules. No small modules that can break off or get misplaced.

Installation Hardware
Furnished with Bolts, Washers, Anchors and Connector. No separate purchase necessary.

2 each per module plus 1 Connector RK-18 and RK-36 = 4 each per module plus 1 Connector

Will not damage undercarriage of low level vehicles. Ideal for parking lots and garages; Drive-up teller or sentry areas, etc.

Molded into product; Never need repainting. Always visible on any chosen length. Markings available in Yellow or White.

Any length in 24″ increments. Emergency vehicle friendly with selective length, placement and spacing.

“Good Fit Warranty”
2 year limited against defects in material and workmanship.
Special molds and craftsmanship ensure tight fit on every module. Eases installation. Increases longevity.




  • U.S. Recycled Rubber and exclusive U.S. polyurethane binder
  • The rubber in fiber form contains no rubber dust, granules or fly that will weaken the product
  • Minimum Tensile Strength: 500 psi (see technical data sheet)
  • Minimum Hardness: 65 Shore A (see technical data sheet)
  • Specific Gravity: 1.13
  • Skid Resistance: 89 (Dry)
  • Deform Rate: None (100% Recovery)
  • Chemical Resistance: Impervious to engine oil, road salts, transmission fluid, anti-freeze, gasoline/diesel fuel, solvents, outdoor exposure including extreme hot or cold temperatures.
  • Conformable to pavement variances without curling.

Additional Information

Weight 42 lbs


There are no reviews yet.

Be the first to review “Speed Breakers RK-10”